Japanese Electric Chain Hoist
Japanese electric chain hoist Case: the case is light and solid, with high heat dissipation rate, and full sealing design is suitable for use in the environment with poor working conditions. Reverse phase protection device: it is a special electrical device. When the power connection is wrong,...
Japanese electric chain hoist
Case: the case is light and solid, with high heat dissipation rate, and full sealing design is suitable for use in the environment with poor working conditions.
Reverse phase protection device: it is a special electrical device. When the power connection is wrong, the control circuit cannot work.
Limit switch: there are limit switch devices under heavy lifting, which make the motor stop automatically to prevent the chain from exceeding and ensure safety.
The machine is equipped with upper and lower limit switches, which can prevent overload from damaging the body and load chain. The upper and lower limit switches can prevent over-winding from damaging the body and load chain.
24V/36V device: it can prevent accidents if the switch leakage is encountered during operation.
Braking device: this device can realize instant braking when power is cut off.
Chain bag: lightweight, beautiful and durable.
Chain: imported FEC80 superstrong heat treatment alloy steel chain.
Japanese electric chain hoist is a light and small lifting equipment. The annular Japanese electric chain hoist consists of motor, driving mechanism and sprocket. The annular Japanese electric chain hoist is produced according to international standards. The body is beautiful, strong and durable. All the internal gears are hardened at high temperature, which increases the abrasion resistance and toughness of the gears.
Structural features of Japanese electric hoist:
The machine body selects high strength tensile shell or die-cast aluminum shell, adopts thin wall extrusion molding process precision manufacture, the volume is small, the weight is light, the strength is high. The standard annular electric hoist has an independent transmission system, a two-stage coaxial transmission gear mechanism in the sealed gearbox and a long life oil bath lubrication system. Electric calabash powder metallurgy clutch is used as overload protection device, brake adopts disc type direct current electromagnetic field brake, brake torque is large, smooth, rapid, noise is small.
Applicable scope of Japanese electric chain hoist:
It is mainly used in various industries such as workshop, warehouse, wind power generation, logistics, wharf and construction. It can be used for lifting or loading and unloading goods. The endless Japanese electric chain hoist is operated by the operator with a button on the ground, and can also be operated in the control room or with wired (wireless) remote control. The annular Japanese electric chain hoist can not only be used for fixed suspension, but also can be used with electric monorail trolley and hand-push/hand-pull monorail trolley.
Tonnage of Japanese electric chain hoist: 0.1t, 0.25t, 0.5t, 1.5t, 1t, 2t, 3t, 5t, 10t, 15t, 20t, 25t, 30t.
It is a kind of Japanese electric chain hoist, adopting high efficiency, light weight motor, stamping steel structure shell, high strength safety hook, bearing unexpected overload impact will not break, just gradually deformation. The humanized design adopts the special wire device. When the power supply is not connected correctly, the control circuit cannot work, effectively preventing the accident.