300KG Electric Chain Hoist

300KG Electric chain Hoist

300Kg electric chain hoist is often used in the workshop, this small size, weight light, easy installation, running and lifting is very stable hoist, has begun to replace the bulky electric hoist, and CD-type electric hoist will be slowly replaced. Before purchasing the 300Kg electric chain hoist, according to the following points to identify the quality of the 300Kg electric chain hoist, first after the power supply control chain electric hoist up and down move, observe the direction key is correct, while paying attention to the up and down operation stop, whether there is a brake sound, in addition to the stop, the chain time has slipped, if there is, Explain that the friction sheet is too loose or is not installed properly. After these no problems, tap the up and down key, observe the running distance, the smaller the chain hoist the better. 

Tips: In some factories or workshops, sometimes need to run a relatively small distance, such as installation or docking, need to slowly lift or lower the hoist to facilitate calibration and installation, and  the 300Kg electric chain hoist single-speed, two-speed sometimes slow can not meet the installation speed, this time can be a bit of a button way, Point to stop, the time is very short, so the range of movement is relatively small, you can be calibrated once after each tap, and so on, the device installation success. This is also why when choosing a ring-chain electric hoist, tap to check the lift distance, in principle, the smaller the lift distance, the better.