Home > News > Content
How Do I Select The 2ton Cargo Lifting Chain Hoist?
- Aug 30, 2018 -

How do I select the 2ton cargo lifting chain hoist?

The annular 2ton cargo lifting chain hoist is a light and small lifting equipment, which consists of motor, driving mechanism and sprocket. It is small in size, light in weight, reliable in performance, firm and durable. All internal gears are hardened at high temperature, which increases the abrasion resistance and toughness of the gears. Fine workmanship and close fit between the gears. Convenient operation, wide application range, has begun to gradually replace the bulky electric hoist. But many people don't know the selection criteria when choosing 2ton cargo lifting chain hoist and are at a loss when buying them. Today, let me tell you something about it.

The use range of endless 2ton cargo lifting chain hoist is very wide. It is mainly used in various industries such as workshop, warehouse, wind power generation, logistics, wharf and construction. It can be used for lifting or loading and unloading goods. In the selection of electric hoist, first of all, power should be switched on to control the movement of the 2ton cargo lifting chain hoist up and down, and observe whether the direction key is correct. Pay attention to whether there is sound of brake when the up and down operation stops; Look at the stop, there is a slip in the chain.After these are no problems, click up and down to observe the running distance. The smaller the distance, the better the chain hoist.

The annular 2ton cargo lifting chain hoist has an independent gearbox system, a two-stage coaxial transmission gear mechanism in the sealed gearbox, and a long-life oil bath lubrication system. Electric calabash powder metallurgy clutch is used as overload protection device, brake adopts disc type direct current electromagnetic field brake, brake torque is large, smooth, rapid, noise is small.The chain hoist is operated by operators following on the hoist with a button, which can also be operated in the control room or with wired (wireless) remote control. When selecting, check its operation to see if there is anything wrong with it.

Also, pay attention to small details. If the screws of the test case have been tightened; Whether the handle operates normally; Weak operation coordination, no abnormal sound or stuck, you can pull the trigger to loosen the handle, thread into the wire, and then pull the forward or backward handle to see if the action is normal. Also check the wire rope for wear, kink or break, etc.