Home > Knowledge > Content
Explosion-proof electric hoist
- Dec 10, 2018 -

Explosion-proof electric hoist is a kind of electric chain explosion electric hoist is the ring chain electric hoist as the main design and manufacture of F hereinafter referred to Electric hoist).

Its explosion-proof performance is in line with JB/T10222-2001 <explosion-proof electric hoist> and GB3836.1-2000 <explosive gas environment electrical equipment-Part 1th: General requirements> and GB3836.2-2000<electrical equipment for explosive gas environments part 2nd: Explosion-blown "D"> GB 12476.8-2010/IEC61241-2-1:1994-combustible dust environment with electrical equipment regulations, made into explosion-proof electric hoist.

Total "ExdIIBT4 ", " Extd A21 IP65 T130" Two kinds of explosion-proof signs of electric hoist.

Suitable for factory explosion capacity is not higher than IIB level, The ignition temperature is not less than the combustible mixture site of the T4 group.

explosion proof hoist

 

 Main Application

Electric hoist is suitable for lifting and transporting heavy loads in an explosive gas environment in the factory (LL Class). It can be used in explosion-proof single beam overhead crane or  suspension overhead crane. It can also be mounted on a fixed suspended I-steel track for straight line or curved reciprocating motion.

can also be installed to be used for ascension or winch.

Electric hoists are not suitable for use in environments full of corrosive gases.

 

 Environmental conditions

"ExdIIBT4" explosion-proof electric hoist is suitable for in the factory with explosion-proof level not higher than"B" level, ignition temperature group is not less than "T4" group of combustible gas, vapor and air formation of explosive gas environment. The hazardous areas applicable to all types of electric hoists are "zone 1" and "Zone 2". Examples of hazardous gases applicable to various types of electric hoists are shown in table 1. Other gases not included in the table can be found in GB3836.1-2000 Appendix B to the 1th part of the electrical equipment for explosive gas environment: general requirements.