Home > Knowledge > Content
Reduce the load, enhance lubrication, strengthen training, pay attention to inspection
- Apr 12, 2018 -

Truck cranes generally consist of truck chassis, truck crane parts, cargo boxes, power take-offs, and cranes. The truck crane is a kind of equipment that can lift, rotate and hoist the cargo by hydraulic lifting and telescopic system, and is usually assembled on a truck. Truck crane maintenance instructions As the crane is a special vehicle, the operator should accept the guidance and training of the manufacturer, have a sufficient understanding of the structure and performance of the vehicle, and obtain certain crane crane operation and maintenance experience from the manufacturer. Operate the machine. The manufacturer provides the product maintenance manual for the truck crane. It is necessary information for the crane crane operator to operate the equipment. Before operating the machine, it is necessary to read the use and maintenance instructions of the truck crane and operate and maintain according to the requirements of the manual. Crane. Operators should pay attention to check the coolant, lubricating oil, brake fluid, hydraulic oil and fuel oil (water) level and quality frequently, and pay attention to check the sealability of the vehicle. The requirements for using and maintaining the truck crane during the running-in period can be summarized as: lightening the load, strengthening lubrication, strengthening training, and checking. As long as the operators pay attention to and follow the manufacturer's requirements for maintenance and maintenance of the on-load crane running-in period, it will reduce the occurrence of early failure of the truck crane, prolong service life, improve operating efficiency, and make the truck crane bring you the most benefits. At the same time, the lubrication of each lubrication point of the truck crane should be strengthened. It is recommended that during the break-in period, every shift must be greased with special requirements for lubrication points. Therefore, the components (especially the mating surface) are likely to wear during the running-in period of the on-vehicle crane and the wear speed is high. At this time, if it is overloaded, it may cause damage to parts and cause early failure of the truck crane.