Home > News > Content
How To Install Electric Cargo Lifting Hoist
- Aug 14, 2018 -

Electric cargo lifting hoist seems to be a small device, and its use and operation are very simple, but even if electric cargo lifting hoist is very simple, there will still be more or less problems when we install and use it. Next, our professional technicians will show you how to install electric cargo lifting hoist.

First of all, after getting the electric cargo lifting hoist, it should be inspected. After the inspection, documents, specifications, certificates and other related items should be checked. In addition, we should see that the appearance of the equipment should be free of damage.

If none of the above, a then we can be ready to install.

1. Carefully read the operation manual and other random documents to understand the product structure.

Check whether the electrical control box is wired according to the electrical diagram, and check the insulation state of the lifting motor and walking motor.

2. The buffer devices at both ends of the track or i-beam must be fully installed;

3. Whether the supporting points of i-beam are constructed according to the drawing and the connection is firm;

4. The splice of i-beam must be constructed in accordance with the drawing, and the lower flange must be polished and smooth without blocking the wheels.

Detection before hoisting of electric cargo lifting hoist:

5. Before hoisting, check the gear reducer of the lifting part of the electric cargo lifting hoist carefully, and see whether the lubricating oil is injected as required, and whether the lubricating grease is injected in the moving part.

Remove grease or rust - proof oil from electric trolley tread.

6. Check whether the fixed end of the wire rope is tight and the plug is wedged.

7. Check whether the wiring of the control button is correct, and the safety rope of the fixed button must be installed.

8. According to the regulations, the hook must be painted with yellow and black zebra print paint, and the hook safety device is complete.

9. The steel wire rope and reel shall be fixed with three platens at each end, and the bolts shall be tightened.

10. The actuator is assembled correctly, and the limit switches of rising and falling are installed correctly.

In addition to these ten steps, I also want to tell you that the installation of electric cargo lifting hoist should be based on the actual situation, there is no need to follow the book procedure, because the actual situation is changeable, we should be flexible.